1. Prepare hot water

EVERNAIL cannot be removed with regular water. Be sure to prepare warm water. It's easier to remove the nails while soaking in the bath.

2. Create a small gap

Use a plastic or wood stick to create a gap between the press-on and your natural nail. Don't remove the nail all at once, instead create a small gap all around your nail first.

3. Widen the gap

Let the water slowly penetrate and soften the adhesive, gradually widening the gap and removing the nail.

 

4. Scrape off the glue

Scrape off any remaining glue from your natural nail and the press-on with your fingernail or the plastic/wood stick.

5. Put them in the case

Wipe off any moisture from the press-on nails and store them in the case. By storing them carefully, you can reuse them.

 

TIP: If residual glue won't come off

We recommend soaking the nails in hot water at approximately 60°C (104°F) for 30 minutes. This will soften the glue, making it easier to remove.

Caution: Do not use hot water above 80°C (176°F).